DIY Detachable Dream USB Cable Kit

$17.00

 

DIY Dream Cable Kits ship within 2 business days! (Monday-Friday)

All of our USB connectors require being soldered to USB wire

For your PC or USB hub

For covering your USB connectors

Please visit our Color Chart for pictures of each paracord!

(Optional) If you would like to add a second sleeving layer on top of your paracord. Techflex provides extra reinforcement, particularly if you plan to add a coil to your cable 🙂

 

DIY Dream Cables! We know that sometimes you just want to be able to tinker and create on your own, so let us help you get started 🙂

Choose if you would like a kit to make a non-detachable (single piece) or detachable (two part) USB cable, and we'll walk you through the rest!

Our Non-detachable DIY kit comes with two USB connectors, 3 pieces of heat shrink, your chosen length of wire, and paracord, with the option of adding a secondary Techflex sleeving layer.

Our Detachable DIY kit comes with your preferred detachable connector, two USB connectors, 5 pieces of heat shrink, your chosen length of wire, and paracord, with the option of adding a secondary Techflex sleeving layer.

You may also choose to add solder to your DIY kit to complete the assembly of your cable. All of our USB connectors and detachable connectors require soldering to the USB wire included in your kit.

**NOTE: If planning to add a coil to your DIY cable, we recommend planning about 1 foot of wire length per inch of coil. (This does vary depending on the diameter of the rod used for the coil.)

Check the FAQ page or contact us through our Contact Us Form or at [email protected] with any questions!

Definitions

 

Non-detachable: the standard USB cable layout using a single piece of wire connecting two USB connectors

Detachable: a USB cable layout allowing for a connection point in the middle, splitting your standard cable into two separate pieces

  • GX16: most common detachable connector in custom USB cables – 5 pin with a threaded connection system to hold pieces together
  • YC8: smallest and thinnest connector – 5 pin with a push-pull connection system
  • Weipu: largest but lightest connector – 5 pin with a push-pull connection system

Host Connector: the USB connector that plugs into your PC, laptop, or other power source

Device Connector: the USB connector that plugs into your keyboard or another device

Paracord: the base sleeving layer

Techflex: the secondary sleeving layer covering the Paracord sleeving layer

Disclaimers

 

There are no refunds or exchanges on DIY Dream USB Cable Kits.

You are responsible for your own safety in the assembly and soldering of DIY Dream USB Cable Kits.

Dream Cables will not be held responsible for any damage caused to any device or PC due to questionable assembly of a DIY Dream USB Cable Kit. We test our custom cables before shipment, and by taking on the adventure of a DIY cable, you also take on the responsibility of testing your DIY cable.